Trennjaeger Cold Saws

Trennjaeger cold saws are possibly the best known cold saw in the steel fabricating industry. The LTS Cold Saw Models 520 and 760 are designed for precision cutting of all metals, including aluminum, steel, alloys and stainless. These cold saws are ruggedly constructed to provide many years of reliable cutting. Using well respected German technology has produced high quality cold saws and other fabricating equipment for more than forty years.

The LTS-520 machines gearbox is mounted below the saw table & travels horizontally on precision ground & hardened guide ways. The Trennjaeger LTS 520 employs an all spur & helical gear train, which operates in a constant oil bath. Gear shafts are journaled in heavy-duty roller bearing, to provide the smoothest & most efficient possible method of power transmission.

Trennjaegers thick working table and powerful pneumatic clamps serve to minimize vibration while cutting. The material being cut is clamped horizontally & vertically to ensure that it is positively secured. The width of the clamping range is normally 0 to 16-3/4″, but by exchanging the pressure pieces on the horizontal clamp, the range can be increased to 20-1/2″. This auxilliary pressure piece if furnished with the machine and is also useful when acute miters are performed.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on Trennjaeger Cold Saws.

Trennjaeger Cold Saws

FEATURES+
  • Semiautomatic machine with clamping-sawing-moving back-releasing
  • Double linear system and ballscrewspindle with servodrive system
  • Siemens control with digital readout of angles
  • Four times clamping untis
  • Mist spray system
SPECS+
LTS 520 Cold Saw LTS 760 Cold Saw
Max. Blade Diameter 20-1/2 in (525 mm) 30 in (760 mm)
Miter Capacity 90, 45, 30 degrees 90, 45, 30 degrees
Cutting Capacity (Round) 6 in 8 in
Cutting Capacity (Profiles) 17×6″, 11×6″, 7-1/2×6″ 21-1/2×8″, 14×8″, 9-1/2×8″
Operating Voltage 240 or 480V 240 or 480V
Full Load Draw 12-6 amps 21-11 amps
Blade Periphery Speed 95-190 ft/min 59-118 ft/min
Feed Rate 2-29 in/min 2-29 in/min
Machine Weight 2,750 lbs 3,410 lbs
MEDIA+

Please call for more information about Trennjaeger Cold Saws 1 (800) 286-3624

OPTIONS+

Please call for more information about Trennjaeger Cold Saws 1 (800) 286-3624

Description

Trennjaeger cold saws are possibly the best known cold saw in the steel fabricating industry. The LTS Cold Saw Models 520 and 760 are designed for precision cutting of all metals, including aluminum, steel, alloys and stainless. These cold saws are ruggedly constructed to provide many years of reliable cutting. Using well respected German technology has produced high quality cold saws and other fabricating equipment for more than forty years.

The LTS-520 machines gearbox is mounted below the saw table & travels horizontally on precision ground & hardened guide ways. The Trennjaeger LTS 520 employs an all spur & helical gear train, which operates in a constant oil bath. Gear shafts are journaled in heavy-duty roller bearing, to provide the smoothest & most efficient possible method of power transmission.

Trennjaegers thick working table and powerful pneumatic clamps serve to minimize vibration while cutting. The material being cut is clamped horizontally & vertically to ensure that it is positively secured. The width of the clamping range is normally 0 to 16-3/4″, but by exchanging the pressure pieces on the horizontal clamp, the range can be increased to 20-1/2″. This auxilliary pressure piece if furnished with the machine and is also useful when acute miters are performed.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on Trennjaeger Cold Saws.

© Copyright 2024, Ocean Machinery Inc.