HE&M Plate Band Saws

HE&M Plate Band Saws – These specialty HEM band saws are used primarily for specialty band sawing applications. If you need to strip large sections of plate or have a need for fixturing to make a unique cut, these are perfect bandsaws. Band Saw cutting capacities range from (25-31″) high to (8-20′) length. These HEM band saws can be configured so that either the head or material moves through the cutting zone.

Crosscut Saws:

  • These specialty plate saws are used primarily for special plate or block sawing applications. If you need to strip sections of plate both in length and across the width these saws will do it. The process is commonly called “Slice and Dice”. The saw arm is computer-controlled for precise chip removal rates, making cutting efficient and maximizing blade life. When the cross-cut is required the guides are switched to “right angle guides” and the arm is able to cut perpendicular to the table. The patented Cut Watcher® is a standard feature to monitor the straightness of the cuts.

Moving Material Saws:

  • HE&M Saw manufactures a variety of plate saws under two series types; the PS Series and the PM Series. The PM series includes several models with varying capacities and features. The PM series is designed to have the table move and the material traverse through the fixed head. This is an advantage when cutting some materials due to the rigidity of the stationary arm. With standard features like the Cut Watcher®, Laser Light System, precision control of the head with the Electronic Controlled Traverse (ECT) for the table to ensure efficient cutting rates.

Continuous Moving Material Saws:

  • These saws are used primarily for specialty sawing applications such as splitting I-Beams into “T” structural shapes or splitting other structural shapes such as tubing. The material advances on a powered roller table and traverses through the blade. The material is guided with a Top Clamp Roller to keep it engaged with the powered roller system as it advances forward and a horizontal “Squaring Station” with vertical alignment rollers to control side-to-side movement and square it with the datum line. Options like a powered chip conveyor and added material handling make the sawing job easier and more efficient.

Moving Saw Head Saws

  • HE&M Saw manufactures a variety of plate saws under two series types; the PS Series and the PM Series. The PS series includes several models with varying capacities and features. The PS series is designed to have the saw head traverse through the material. This has the advantage of taking up less space because the table is stationary. With standard features like the Cut Watcher®, Laser Light System, precision control of the head with the Electronic Controlled Traverse (ECT) to ensure efficient cutting rates and blade change is made easier with the swing-out arm.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the HE&M Plate Band Saw.

Categories: ,

HE&M Plate Band Saws

FEATURES+

Please call for more information about PLATE HE&M BAND SAW – PLATE BAND SAW 1 (800) 286-3624

SPECS+
 

Definitions:
PM Plate moves through the saw head from one side to the other. (See Photo)
PS Saw head moves through the material
MODEL CAPACITY TRAVELS BLADE HP
PS-18/96 18″ 4

X 8′

1.5″ 15
PS

18/120

18″ 5

X 10′

1.5′ 15
PS

18/144

18″ 5

X 12′

1.5″ 15
PS

18/144A

18″ 5

X 12′

1.5″ 15
PM-25/96 25″

X 25″

4

X 8′

1.5″ 15

PM-25/120

25″

X 25″

5

X 10′

1.5″ 15

PM-25/144

25″

X 25″

5

X 12′

1.5″ 15

MEDIA+

Please call for more information about PLATE HE&M BAND SAW – PLATE BAND SAW1 (800) 286-3624

OPTIONS +

Please call for more information about PLATE HE&M BAND SAW – PLATE BAND SAW 1 (800) 286-3624

Description

HE&M Plate Band Saws – These specialty HEM band saws are used primarily for specialty band sawing applications. If you need to strip large sections of plate or have a need for fixturing to make a unique cut, these are perfect bandsaws. Band Saw cutting capacities range from (25-31″) high to (8-20′) length. These HEM band saws can be configured so that either the head or material moves through the cutting zone.

Crosscut Saws:

  • These specialty plate saws are used primarily for special plate or block sawing applications. If you need to strip sections of plate both in length and across the width these saws will do it. The process is commonly called “Slice and Dice”. The saw arm is computer-controlled for precise chip removal rates, making cutting efficient and maximizing blade life. When the cross-cut is required the guides are switched to “right angle guides” and the arm is able to cut perpendicular to the table. The patented Cut Watcher® is a standard feature to monitor the straightness of the cuts.

Moving Material Saws:

  • HE&M Saw manufactures a variety of plate saws under two series types; the PS Series and the PM Series. The PM series includes several models with varying capacities and features. The PM series is designed to have the table move and the material traverse through the fixed head. This is an advantage when cutting some materials due to the rigidity of the stationary arm. With standard features like the Cut Watcher®, Laser Light System, precision control of the head with the Electronic Controlled Traverse (ECT) for the table to ensure efficient cutting rates.

Continuous Moving Material Saws:

  • These saws are used primarily for specialty sawing applications such as splitting I-Beams into “T” structural shapes or splitting other structural shapes such as tubing. The material advances on a powered roller table and traverses through the blade. The material is guided with a Top Clamp Roller to keep it engaged with the powered roller system as it advances forward and a horizontal “Squaring Station” with vertical alignment rollers to control side-to-side movement and square it with the datum line. Options like a powered chip conveyor and added material handling make the sawing job easier and more efficient.

Moving Saw Head Saws

  • HE&M Saw manufactures a variety of plate saws under two series types; the PS Series and the PM Series. The PS series includes several models with varying capacities and features. The PS series is designed to have the saw head traverse through the material. This has the advantage of taking up less space because the table is stationary. With standard features like the Cut Watcher®, Laser Light System, precision control of the head with the Electronic Controlled Traverse (ECT) to ensure efficient cutting rates and blade change is made easier with the swing-out arm.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the HE&M Plate Band Saw.

© Copyright 2024, Ocean Machinery Inc.