Possibly
the best know cold saw in the steel fabricating industry is the
Trennjaeger cold saw. The LTS Cold Saw Models 520 and 760 are designed for precision cutting of all metals, including aluminum, steel, alloys and stainless. These
cold saws are ruggedly constructed to provide many years of reliable cutting. TRENNJAEGER,
using well respected German technology has produced high quality cold saws
and other fabricating equipment for more than forty years.
Trennjaeger's heavy-duty, spur and helical gear train provides efficient power transmission from the
cold saw motor to the blade. This accounts for the exceptional durability of the
Trennjaeger cold saws.
One of the outstanding features of the LTS series is the blade stabilization system, as shown in the photo.
|
The stabilizer guides the blade, so as to prevent "run-out" when the blade engages the material being sawn, even at acute miters. This system ensures the squareness of cut, which has been a trademark of saws produced by
TRENNJAEGER.
The stabilizers are adjustable and also will swing out of the way to allow quick exchange of the saw blade.
The quality of the finished cut, that is the smoothness of the sawn surface, is unsurpassed due to the provision for a pin type chip removal system. The adjustable chip remover mounts perpendicularly to the saw blade and engages the gullets of the saw blade's teeth.
As the blade rotates, the pins clear the chips lodged in the teeth of the blade. Re-cut (or the carrying of waste material back into the cut) is thereby prevented. The quality of the surface finish is preserved, while the maximum speed of blade feed can be achieved.
|
