 |
|
 |
|
 |
-
4 Position In-Line depth stop with micrometer
adjustable limits with pedestal mounted selector switch
-
Automatic
Lubrication allowing the least amount of maintenance
-
Wide Flange Beds Permanent or removable allowing a wide variety
of work
|
Ram Control and Safety Systems for Standard Press Brakes |
-
Hand/Foot Safety Sequence With Footswitch –
System that allows the operator to use a
footswitch after the ram hits the slow speed.
-
Light Curtain Safety Barrier With Footswitch –
Infrared light system that allows the use of a
footswitch during all points of operation.
-
Extra 2 Hand Control Station – Extra 2
hand pedestal station for 2 man control (one pedestal is
standard).
-
Extra Footswitch – For 2 man control in
use with Hand/foot sequence or light curtain system.
-
Low Speed Retract – Slows the return speed
of the ram considerably when handling heavy, long work pieces,
recommended for large press brakes – Can be turned on/off for
small work.
-
4 Position In-Line Depth Stop – Pre-set up
to 4 different ram depths with micrometer precision and select
all four ram depths from 4 position selector switch mounted on
pedestal.
-
Auto Return Of Ram – Ram automatically
returns to top of stroke after completion of stroke.
-
Adjustable Pressure Sensitive Ram Reversal –
Protect dies and work-pieces by setting a maximum
pressure and once the pressure is achieved, the ram reverses.
-
Programmable Ram Control - Set the Up
limit, Speed change, the Lower limit and many other features
with a PLC (Y axis) control.
|
Lube Systems for Standard Press Brakes |
-
Manifold Centralized Lube System – All
lube points are brought to a centralized location on the back of
the brake for incredibly simple and fast maintenance.
-
Automatic Lubrication System – All points
are automatically lubricated with powered pump through an air
operated, timed system.
|
Bed And Ram Extensions for Standard Press Brakes |
-
Wide x 10’ Long Removable Flanges for Bed And/Or Ram -
10” wide precision machined, removable bed and/or
ram extensions x 10’ in length between the end frames. (NOTE:
Must be ordered with machining of bed and ram for flanges.)
-
Machining For 10” Wide x 10’ Long Removable Flanges –
Precision machining to the bed and/or ram
required to mount the machined flanges.
-
Permanent Bed And Ram Flanges –
Non-removable, permanent flanges for bed and/or ram used for
wide dies and pressing applications. (NOTE: Typical press
brake tooling cannot be used w/wide bed and ram.)
-
Horns For Bed And Ram – 12” long
extensions of the bed and ram designed to lengthen the bed and
ram but not the distance between housings.
|
Other Available Options for Standard Press Brakes |
-
Decompression System For Bottoming Applications –
Reduces shock to hydraulic system that occurs
during bottoming applications.
-
Die
Roll Bars For Four Way Dies – Convenient
hooks in the ram that aid in turning four way dies.
-
24” T-Slot Support/Gauging Arms – Heavy
duty T-slotted arms that provide support for work pieces and
allow operators to set stops in t-slots for gauging purposes.
Also available with scales.
-
Drop Stops For T-Slot Support Arms –
Gravity stops that allow operators to easily gauge material.
-
5/8” T-Slot Across Front Edge Of Brake Bed –
T-slot across edge of bed to move arms left to right.
-
Extra Open Height – Increases the open
height of ram. (NOTE: Does not increase stroke length.)
-
Extra Stroke – Increases overall ram stroke.
(NOTE: Does not increase open height.)
-
Extra Throat Depth – Increases overall
throat depth measured from the centerline of bed.
|
