Rush Machinery Drill Grinder

Heavy-duty cabinet stand
Flood coolant system
Powered workhead for semi-automatic operation
Halogen worklamp
Diamond and CBN grinding wheels
Overhead wheel dresser
Air-bearing endmill OD grinding attachment

Features

Hard chrome plated and ground spindle with a 10" stroke
Tools are held in 5-C or 5-CG collets or extension bushings for up to 2" (50 mm) shanks
Flute finger has dovetail crossfeed and micrometer vertical adjustment
Direct angle settings for up to 20 degrees for the O.D., 360 degrees for rotation, and 30 degrees for tilt (fore and aft)
Rocker arm tilts fixture away for easy movement from one flute to the next
Grinds the O.D. of any number of flutes and includes 12-position index plate (others available for end grinding)
Unique micrometer infeed built into fixture
Allows fine-feeding of the tool into the wheel
It is graduated in .001" (or .04 mm) of diameter

Semi-Automatic Version

rush machinery drill and tool grinder drill sharpener The power-driven workhead of the semi-automatic version offers a quiet, smooth rotation of the workhead. Manual effort is reduced for heavier grinding and spin grinding operations. Sparkout is allowed to occur by using a minimum of manual infeed along with a reduction in workhead rotation. The speed is controlled by a conveniently located valve; the adjacent four-way valve allows grinding in either direction. A hand knob on the workhead is used for indexing and setup.

Air bearing Fixture on Model 132C

Allows precision sharpening of endmills, reamers, shell mills and other cutters. The spindle is supported with a thin film of air providing nearly frictionless motion, resulting in a smooth, even grind. The fixture quickly mounts on the Model 132C, 250A, 252, 380 or 382S grinders, or is available with a universal base to fit most tool and cutter or surface grinders.

Sealed linear bearing with hardened guide shafts
Detented downfeed in .001" increments
Hardened downfeed screw with wiper seal
High-quality diamond included for truing standard and ceramic wheels

Capacity: .080" to 1.25" (2 to 32 mm) diameter straight shank or taper shank.
Drill Point Angles: 40 to 180+ degrees.
Motor: TEFC 1/2 HP 115/230V. single-phase (standard) TEFC 1 HP 230/460V. three-phase (optional).
Dimensions: Benchtop machine: 27" (69 cm) wide x 28" (71 cm) deep x 18" (46 cm) high. With cabinet: 34" (86 cm) wide x 33" (84 cm) deep x 45" (114 cm) high
Weight: Benchtop machine: 240 lb. (110 kg) net, 330 lb. (150 kg) cratedWith cabinet: 350 lb (160 kg) net, 460 lb. (210 kg) crated.

Address 6720 NW 15th Way, Fort Lauderdale FL 33309 USA : Toll Free (800) 286 3624 : Tel (954) 956 3131 : Fax (954) 956 3199

AVENGER Beam Drill : CLIPPER Angle Line : LIBERATOR Beam Coper : TERMINATOR Band Saw : ELIMINATOR Material Handling

RUSH MACHINERY DRILL SHARPENER

Rush Machinery 132C Drill & Tool Grinder

Tool Grinder and Drill Sharpener

Optional Accessories

Features

Semi-Automatic Version

Air bearing Fixture on Model 132C

Overhead Wheel Dresser

Features:

Specifications of Model 132C