PEDDINGHAUS BEAM LINE

Please note that our in-house inventory of USED BEAM LINES is updated on a regular basis, but the inventory shown on this web site might be out of date, so please email us for our latest offerings

UPDATED 11/17/2009

Peddinghaus Beam Line 

Model.....TDK-1000/3-E 

CNC Beam Drill
Age:.................................... 1987

DRILL ASSEMBLY
Spindle Travel ................... 11-13/16"
Power Per Spindle .................11 HP
Spindle Speeds (60 Cycles) ... 280/560 RPM
Maximum Drill Diameter ..........1-9/16"
Rapid Advance and Retract ......20 FPM
Maximum Feed Rate ...............12 IPM
Drill Holder .............................. #4 MT
            

ROLLER FEED MEASURING SYSTEM

Positioning Speed in X-Axis .130 FPM
Max. Work Piece Weight ......18,000 Lbs.
Minimum Beam Length .............63"

WORK PIECE DIMENSIONS

Maximum Width .......................40"
Maximum Height ...................... 24"
Maximum Web Thickness .........4"
Maximum Flange Thickness ..... 7"

 

Equipped With:

• Fagor CNC Control

• 10 Transfer Tables

• 60' In-feed Conveyor

• 60' Out-feed Conveyor

• Miscellaneous Tooling

• Spare Parts
   

This Beam Line is in excellent condition and available for inspection Under Power in a Southeast Plant

   

Peddinghaus Beam Line 

Model TDK 1000/3-E

Click images to see larger image

Used PEDDINGHAUS CNC Beam Line

Excellent Condition

Model PEDDINGHAUS beam line TDK-1000/9D consisting of :

One (1) 9-Spindle - CNC Controlled Structural Beam Line Model TDK 1000/9D, controlled by a GENERAL ELECTRIC Mark Century 1050 CNC Control, complete with Pentium PC

Peddinghaus Beam Line date of manufacture is 1984, yet has relatively low hours of operation. this machine has been very well maintained and is in excellent condition.

This Peddinghaus Beam Line is still in production and can be seen under power at the owners facility. CALL NOW to arrange a viewing. Removal and Installation, as well as operator training on this Peddinghaus CNC beam drill line is available and can be arranged by Ocean Machinery.

Peddinghaus Beam Line 

Model TDK 1000/9D

USED PEDDINGHAUS BEAM DRILL LINE, INCL. SAWING & MARKING SYSTEM

PEDDINGHAUS BEAM LINE model TDK-1000/9E  

PEDDINGHAUS COLD SAW model LC-1250 (with Miter Base)

PEDDINGHAUS MARKING SYSTEM model Signomatic YEAR BUILT: 1989 (Dec.)

HOURS OF OPERATION: 22,100 hours

CNC CONTROL : Siemens SINUMERIK

CAPACITY: 40" WIDE X 24" HIGH

SAW MITER BASE: 45 degree - 90 degree - 45 degree

This Peddinghaus beam line is currently in full service and can be seen operating under power. The complete beam line is very well maintained and is in excellent condition. These photos of the machine were taken in April 2001.

As part of Ocean Machinery's service package, we can arrange for professional disassembly and installation at your facility. Do not waste time. This beam line with sawing and marking system is going for a fraction of the cost of a new system.

Peddinghaus Beam Line

Model TDK-1000/9E