QA 4000 - SELF DRILLING MAG DRILL

Quick Automatic Magnetic Base Drill

• 115V AC 

• Proven Automatic Technology

• Self feeding

• Automatic Return

• Load detection to regulate speed and feed of cutter

• 700 RPM to maximize Carbide Tipped Cutter capability

• Simple One-touch cutter replacement

• Carbide tipped Cutters 9/16" to 1-7/16" through material up to 1-3/8" thick

• Only 40 lbs. for easy handling
  Coolant through the cutter

QA 6500 - SELF DRILLING MAG DRILL

Quick Automatic Magnetic Base Drill

• 220V AC

• Proven Automatic Technology

• Self feeding

• Automatic Return

• Load detection to regulate speed and feed of cutter

• Two-stage gear for 400 rpm and 750 rpm cutter speed

• Simple One-touch cutter replacement

• Carbide tipped Cutters 9/16" to 2-1/2" through material up to 2" thick

• Automatic step feed to optimize cutter penetration

JETBROACH CUTTERS JETBROACH MAG DRILL CUTTERS

Ocean Machinery carries the full range of One-Touch JETBROACH Mag Drill Cutters available in  3/4" shanks - diameters from 7/8" up to 4" - cutting depths from 1-3/8" to 3" deep .

Features of One-Touch Cutters

• Single pass cutting, needs no pilot hole.

• Annular part does all the work so small cutting resistance reduces drilling time. 

• Cutting of slotted, elongated and edge holes is now possible. 

• Abundant cutter sizes to suit wide range of applications. 

• Produces little slag and few chips for easy disposal. 
  Carbide tips sharp cutting edges. 

• Can also be fitted to and used with previous ATRA Ace models using a hexagon socket setscrew.

• Improved concentricity extends cutter life! 

• Cutter holding system consisting of three balls inside the arbor body produces a self-centering effect during cutting 

For more information on the Nitto Kohki Mag Drills

 call Ocean Machinery now at 1 (800) 286-3624

or complete our information request form.