HOME > BELT GRINDERS AND SANDERS > KALAMAZOO GRINDERS
Kalamazoo GRINDERS
AND SANDERS
KALAMAZOO
BELT Grinders |
Kalamazoo Industries make wet or dry belt grinders in widths from 2” to 6” wide and special length belt grinders may be made on request.
Ideal for de-burring, graining, metallurgical polishing, flattening surfaces. Kalamazoo grinders are from Michigan since 1960. |
|
2FSM 2″ Belt Grinder – GREAT for knife making!
- V belt drive.
- Mount to your bench, fixture
- One knob tracking, sanding belt is spring tensioned .
- Model: 2FS72M with 1/2 HP , 110 volt motor and base.
- Wt: 115 lbs.
|
|
|
BG260HS 2″ belt grinder
- Heavy Duty Direct Drive
- 2″x60″ Belt
- 3HP, 1PH, 110/220 or 3PH 220/440 3450 RPM, Manual switch.
- 8″ contact wheel-right side clear for corner sanding
- 5400 SFPM
- 2″x12″x1/2″ reversible platen
- Easy one knob Tracking
- 2″x 3″ work table, dual purpose for contact wheel and top platen
- Spring loaded belt tension, quick belt change
- Model: BG260HS
- Dimensions: L23″ x W16″ x H40″
- Wt: 195 lbs
Also available without stand
- Model: BG260H
- Wt: 110 lbs.
Also available with dust collector base, DCV-4
- Model: BG260HV
- Wt: 350 lbs.
|
|
|
KS390/KS490 3″ and 4″ wide belt grinders
- Fast metal removal, no heat!
- KS390,3″x 90″ belt
- KS490,4″x 90″ belt
- 8″ serrated 70 duro contact wheel
- Direct drive
- Spring belt tension
- Versatile
- Multi-position horizontal through vertical
- Optional Built-in vacuum base (KS390V,KS490V)
- 2 HP- 1PH or 3 HP 3 PH
- Heavy-duty
- 3″ x 24-1/2″ steel reversible platen
- 7200 SFPM
|
|
 |
KS390HV-5/KS490HV 3″ , 4″ Horizontal Belt Grinders
- 5 horsepower!
- Remove metal FAST with no heat! 8″ Dia. contact wheel, 24″ long platens!
- Keep dirt down!
- 5 HP, 3 PH belt sander (220/440V) – please specify
- Horizontal only, 8″ dia. 70 duro serrated contact wheel
- Manual switch
- Mounted on DCV-6 dust collector – 400 CFM
- Spring belt tensioning
- Model: KS390HV-5 , 450 lbs.
- Model: KS490HV-5 same as above, but with 4″ belt, Wt:450 lbs
|
|
 |
KS690HV 6″ Horizontal Belt Grinder
- Remove metal FAST with no heat!
- 6″ Wide x 8″ diameter 70 duro serrated contact wheel
- 6″ x 24″ platen for flat work
- 7200 SFPM
- 400 CFM vacuum base
- Spring Belt tension
- Manual switch
- Spark chute flips up for horizontal / vertical work.
- Dimensions: W 18″ x D 26″ H 42″
- 5 HP, 3 PH TEFC motor (220/440V) – please specify
- 400 lbs.
- Model: KS690HV
|
|
|
S272V 2″ Belt Grinder Vacuum Base
- Multi purpose sander for grinding, shaping, contouring, flat work, angles, snagging and roughing (see photo )
Platen rotates 360 deg. for many different shapes and styles of sanding.
- Versatile for quick change contact wheel with various angles easy to change.
- 1 HP , 1 ph. or 3 ph.
- Dimensions: L 27″ x W 18″ x H 40″
- SFPM 5400
- 2″ x 72″ belt
- 3″ and 1.5″ serrated contact wheels on rotating platen.
- Mounted on DCV-6 dust collector
Model S272 – same as above but less vacuum base with heavy-duty stand legs
|
For
more information on the Kalamazoo Belt Grinders and Sanders call
Ocean Machinery now at 1 (800) 286-3624 or
complete our information
request form. |
|
