HYDRAULIC PUNCHES

GEKA CNC HYDRAULIC PLATE PUNCH WITH POSITIONING 

GEKA Model PAXY - For Plate and Flat Bar

Ten sizes from 60 to 240 tons with throat depths of 20” and 30”.  Plate sizes from 6” x 6” to 30” x 60”. Plate thicknesses from 1/8” to 1-1/2” with maximum hole size of 6”. Features include: Fagor CNC Control, punch or center punch, hydraulic clamping from side to allow full use of the throat depth, uses standard GEKA or 28XX tooling.

GEKA CNC HYDRAULIC PLATE PUNCH WITH POSITIONING

GEKA Model SEMI-PAXY - For Plate, Angle and Channel

X-Travel: 40”, Optional X-Travel: Extended up to 160” 
Y-Travel: 16”, 20” or 25”
Speed of both X & Y Axis: 24” to 480” per minute 
Minimum positioning distance from center line die: 1” 
Positioning tolerance: + or - 0.003”

GEKA HYDRAULIC SINGLE-END PUNCHES

Model series PUMA with capacities from 60 to 240 ton punch and throat depths of 20" and 30". Standard features include: 

Adjustable stroke length, effective use of "shear" on the punch, full tonnage throughout the stroke, quick change punch holder and stripper to handle standard GEKA tooling, full structural die block, motors and controls.

GEKA PORTABLE PUNCHES

Model PP-50 with 55 ton punch, a maximum capacity of  1-1/16" hole in 1/2" material,  5" throat depth, and 30 to 60 strokes per minute.

For more information on the Geka Hydraulic Punches call Ocean Machinery now at 1 (800) 286-3624 or complete our information request form.