Robust structure in G30 cast steel with oversize drive shafts
All angle and pipe roll models (manual and hydraulic) have digital display of center roll position
Electronic programming system for center roll position of 56 passes, standard for all hydraulic models
High working speed of 6 meters/min (20 ft/min) ensures high productivity
All models can work both horizontally as well as vertically

ADVANTAGES OF THE ERCOLINA PIPE ROLL/ ANGLE ROLL

CE50-CE40

hydraulic cylinder for center angle roll adjustment is located under the frame of the machine to improve the machine performance
all models have electronic measurement of position of center roll, with accuracy ± 0,1mm and digital display
high productivity due to a rolling speed of 6 meters/min (20 ft/min)
twist corrector rolls for angle iron (leg out and leg in) can be fitted, both at fixed angle and variable angle
oversize drive shafts in forged and tempered alloyed steel, mounted in conical roller bearings, reduce the number of passes to a minimum to achieve any given bend radius
in line reduction gearbox in oil bath gives a very high power transmission efficiency
body of machine is in G30 high grade cast steel, with a unique multi-plane design to maximize strength
all hydraulic versions are supplied as standard with an electronic programming system for the center roll position, with capacity to memorize 4 different programs of up to a 14 passes per program
all drive shafts are precision threaded to allow very fine adjustment of tooling gaps, WITHOUT the use of spacers
low voltage controls satisfy all safety standards including CE European standards
machines are MODULAR, and can be upgraded from 2 roll drive to 3 roll drive with a simple kit of parts
special solutions for any bending problem can be developed on request
Our sales network is at your service at all times to help you find the correct solution to all your bending problems, while our comprehensive after sales service will give you the peace of mind that only ERCOLINA® can supply.


CE 40				CE 50
Ref.	Profile	Dimensions mm (inches)	Min. Radius mm (inches)	Angle Roll (type)	Dimensions mm (inches)	Min. Radius mm (inches)	Angle Roll (type)
1		21 x 2,3 (1/2 G x 0,095") 48 x 3,2 (1 1/2G x 0,125") 60 x 3,2 (2"Gx0,125")	80(8") 300 (12") 400 (16")	RT RT RT - TI	26.9 x 2.3 3/4"G x 0.095") 60 x 3.9 (2.5" x 0.156") 76.1 x 3.6 (3" x 0.134")	100 (4") 400 (16") 600 (24")	RT RT RT
2		20 x 20 x 1.5 (0.8"x0.8"x0.058") 40 x 40 x 2 (1.6" x 1.6"x 0.078") 50 x 50 x 3 (2" x 2" x 0.125")	200 (8") 800 (32") 1000 (40")	SR SR SR - TI	20 x 20 x 2 (0.8" x 0.8" x 0.065") 50 x 50 x 3 (2" x 2" x 0.120") 60 x 60 x 3 (2.5" x 2.4" x 0.120")	100 (4") 600 (24") 1000 (40")	SR SR - TI SR - TI
3		30 x 10 x 1.5 (1.2" x 0.4" x 0.058") 40 x 20 x 2.5 (1.6" x 0.8" x 0.095") 50 x 25 x 2.5 (2" x 1" x 0.095")	200 (8") 500 (20") 700 (28")	SR SR SR - TI	25 x 10 x 2 (1" x 0.4" x 0.065") 60 x 40 x 3 (2.5" x 1.6" x 0.120") 80 x 30 x 3 (3.1" x 1.2" x 0.120")	100 (4") 600 (24") 1000 (40")	SR SR - TI SR - TI
4		30 x 10 x 2 (1.2" x 0.4" x 0.078") 50 x 25 x 2.5 (2" x 18" x 0.095") 60 x 30 x 2.5 (2.5" x 1.2" x 0.095")	250 (10") 500 (20") 800 (32")	SR SR - TI SR - TI	25 x 10 x 2 (1" x 0.4" x 0.065") 60 x 40 x 3 (2.5" x 1.6" x 0.120") 80 x 30 x 3 (3.1" x 1.2" x 0.120")	100 (4") 600 (24) 1000 (40")	SR SR - TI SR - TI
5		30 x 10 x 1.5 (1.2" x 0.4" x 0.058") 50 x 25 x 2.5 (2" x 1" x 0.095")	200 (8") 600 (24")	SR SR	30 x 15 x 1.5 (1.2" x 0.6" x 0.058") 60 x 30 x 2.5 (2.5" x 1.2" x 0.095")	150 (6") 600 (24")	SR SR - TI
6		30 x 10 x 1.5 (1.2" x 0.4" x 0.058") 60 x 30 x 2.5 (2.5" x 1.2" x 0.095")	200 (8") 800 (32")	SR SR - TI	30 x 15 x 1.5 (1.2" x 0.6" x 0.058") 60 x 30 x 2.5 (2.5" x 1.2" x 0.095")	150 (6") 600 (24")	SR SR - TI
7		20 (0.8") 28 (1.125") 30 (1.2")	80 (3") 150 (6") 300 (12")	RT RT RT	20 (0.8") 35 (1.4") 40 1.6")	100 (4") 200 (8") 380 (15")	RT RT RT
8		15 (0.6") 25 (1") 30 (1.2")	80 (3") 200 (6") 400 (16")	RS RS RS	15 x 15 (0;6" x 0.6") 30 x 30 (1.2" x 1.2") 35 x 35 (1.4" x 1.4")	100 (4") 200 (8") 250 (10")	RS RS RS
9		15 (0.6") 30 (1.2")	100 (4") 300 (12")	SR SR	15 x 15 (0.6" x 0.6") 35 x 35 (1.4" x 1.4")	100 (4") 250 (10")	SR SR
10		20 x 10 (1.5" x 0.4") 50 x 8 (1.2" x 0.312") 50 x 10 (1.2" x 0.4")	90 (3") 250 (10") 300 (12")	RS RS RS	20 x 10 (0.8" x 0.4") 50 x 12 (2" x 0.5") 60 x 12 (2.5" x 0.5")	100 (4") 180 (7") 300 (12")	RS RS RS
11		40 x 5 ((1.2" x 0.203") 60 x 15 (1.2" x 0.6") 60 x 20 (1.2" x 0.8")	100 (4") 125 (5") 250 (10")	RS RS - TI RS - TI	50 x 10 (2" x 0.4") 100 x 16 (4" x 0.6") 100 x 20 (4" x 0.8")	100 (4") 150 (5.9") 300 (12")	RS RS - TI RS - TI
12		30 x 30 x 3 (1.2" x 1.2" x 0.120") 40 x 40 x 3 (1.5" x 1.5" x 0.120") 50 x 50 x 6 (2" x 2" x 0.236")	130 (5") 250 10") 400 (16")	RS RS RS	25 x 25 x 4 (1" x 1" x 0.156") 50x 50 x 6 (2" x 2" x 0.236") 60 x 60 x 6 (2.5" x 2.5" x 0.236")	110 (4.3") 200 (8") 380 (15")	RS RS RS
13		30 x 30 x 3 (1.2" x 1.2" x 0.120") 40 x 40 x 4 (1.5" x 1.5" x 0.156") 50 x 50 x 6 (2" x 2" x 0.236")	150 (6") 200 (8") 500 (20")	RS RS RS	25 x 25 x 3 (1" x 1" x 0.120") 50x 50 x 6 (2" x 2" x 0.236") 60 x 60 x 6 (2.5" x 2.5" x 0.236")	110 (4.3") 200 (8") 400 (16")	RS RS RS
14		30 x 30 x 3 (1.2" x 1.2" x 0.120") 40 x 40 x 5 (1.5" x 1.5" x 0.203") 50 x 50 x 6 (2" x 2" x 0.236")	100 (4") 200 (8") 300 (12")	RS RS - TI RS - TI	30x 30 x 3 (1.2" x 1.2" x 0.120") 50x 50 x 6 (2" x 2" x 0.236") 60 x 60 x 6 (2.5" x 2.5" x 0.236")	100 (4") 200 (8") 250 (10")	RS RS - TI RS - TI
15		30 x 30 x 3 (1.2" x 1.2" x 0.120") 40 x 40 x 5 (1.5" x 1.5" x 0.203") 50 x 50 x 6 (2" x 2" x 0.236")	150 (4") 250 (10") 350 (14")	RS RS - TI RS - TI	30x 30 x 3 (1.2" x 1.2" x 0.120") 50x 50 x 6 (2" x 2" x 0.236") 60 x 60 x 6 (2.5" x 2.5" x 0.236")	100 (4") 200 (8") 250 (10")	RS RS - TI RS - TI
16		30 x 15 x 4 (1.2" x 0.6" x 0.156") 50 x 25 x 5 (2" x 1" 0.203") 60 x 30 x 6 (2.5" x 1.2" x 0.236")	100 (4") 250 (10") 300 (12")	SR SR - TI SR - TI	30 x 15 x 4 (1.2" x 0.6 x 0.156") 60 x 30 x 6 (2.5" x 1.2" x 0.236") 80 x 45 x 6 (3.1" x 1.8" x 0.236")	100 (4") 200 (8") 300 (12")	SR SR - TI SR - TI
17		30 x 15 x 4 (1.2" x 0.6" x 0.156") 40 x 20 x 5 (2" x 0.8" 0.203") 60 x 30 x 6 (2.5" x 1.2" x 0.236")	125 (5") 250 (10") 350 (14")	SR SR - TI SR - TI	40 x 20 x 5 (1.6" x 0.8" x 0.203") 50 x 25 x 5 (2" x 2" x 0.203") 80 x 45 x 6 (3.1" x 1.8" x 0.236")	120 (5") 200 (8") 300 (12")	SR SR - TI SR - TI
18		30 x 15 x 4 (1.2" x 0.6" x 0.156") 40 x 20 x 5 (2" x 0.8" 0.203") 60 x 30 x 6 (2.5" x 1.2" x 0.236")	300 (12') 350 (14") 1200 (48")	RS RS RS	30 x 15 x 4 (1.2" x 0.6" x 0.156") 40 x 20x 5 (1.6" x 0.8" x 0.203") 60 x 30 x 5 (2.5" x 1.2" x 0.203")	350 (14") 400 (16") 1400 (55")	SR SR - TI SR - TI

Key to table:	Note: The minimum radii quoted refer to material of
RS= Set of standard universal roll.	tensile strength45Kg/mm2 and are obtained with one
RT= Set of rolls for solid profiles.	or more rolling passes. The high rigidity and strength
SR= Set of special rolls.	of machine allows a minimum number of passes.
TI= Tie bar to increase shaft rigidity.

PIPE ROLL AND ANGLE ROLL

ACCESSORIES AVAILABLE ON REQUEST

COD. CE40	COD. CE50	DESCRIPTION
C4ST	C5ST	STANDARD UNIVERSAL TOOLING SET, COMPLETE WITH FEMALE THREADED FLANGE FOR TOOL ADJUSTMENT.
C4SP	C5SP	ROLL SET FOR PROFILES AND SPECIAL APPLICATIONS.
C4AL	C5AL	ROLL SET FOR ALUMINUM TUBES AND PROFILES.
C4A1	C5A1	KIT TO UPGRADE FROM TWO TO THREE ROLLER DRIVE.
CP5A2	CP5A2	TIE BAR TO SUPPORT ROLL SHAFT (S).
C4A3	C5A3	SET OF 3 LONGER DRIVE SHAFTS.
C4A4	C5A4	ANTI-TWIST DEVICE FOR ANGLE IRON.
C4A5	C5A5	MECHANICAL CENTER ROLL STOP FOR "MR" MODELS.
C4A10	C5A10	UNIVERSAL PRESS FOR CE WITH PRISM SHAPED TOOLING TO BEND UP TO 90° (OTHER TOOLING AVAILABLE UPON REQUEST).

Art. CE40	Art. CE50	3 roll set of tooling for tubes (from ø to ø)	Art. CE40	Art. CE50	3 roll set of tooling for square and rectangular profiles (from ø to ø)
C401A	C501A	5 - 20 (0.2"- 0.8")	C402A	C502A	5 - 20 (0.2"- 0.8")
C401B	C501B	21 - 30 (0.9"- 1.2")	C402B	C502B	21 - 30 (0.9"- 1.2")
C401C	C501C	31 - 40 (1.3"- 1.6")	C402C	C502C	31 - 40 (1.3"- 1.6")
C401D	C501D	41 - 50 (1.7"- 2.0")	C402D	C502D	41 - 50 (1.7"- 2.0")
C401E	C501E	51 - 60 (2.1"- 2.4")	-	C502E	51 - 60 (2.1"- 2.4")
-	C501F	61 - 76 (2.5"- 3.0")	-	-	-

For more information on the Ercolina Angle and Pipe Roll

call Ocean Machinery now at 1 (800) 286-3624

We supply Steel Fabricating Machinery throughout the USA, Caribbean Islands, Central and South America!

Address 6720 NW 15th Way, Fort Lauderdale FL 33309 USA : Toll Free (800) 286 3624 : Tel (954) 956 3131 : Fax (954) 956 3199

AVENGER CNC Beam Drill : CLIPPER CNC Angle Line : LIBERATOR CNC Beam Coper : TERMINATOR Band Saw : ELIMINATOR Material Handling System

ERCOLINA ROLLER BENDER - ANGLE ROLLS

ERCOLINA ROLLER BENDER ANGLE ROLL

ERCOLINA ANGLE ROLL BENDER CE 40 AND CE 50

ERCOLINA ANGLE ROLL / PIPE ROLL

CE 40 AND CE 50

ADVANTAGES OF THE ERCOLINA PIPE ROLL/ ANGLE ROLL

CE50-CE40

Key to table:

Note: The minimum radii quoted refer to material of

PIPE ROLL AND ANGLE ROLL

ACCESSORIES AVAILABLE ON REQUEST