Of course, no show is complete without the world famous Oceanettes, and the Austech show as no exception. Local Oceanettes Laura, Becky and Carly were a great hit with show visitors and signed the ever popular Oceanette Calendar.

Anton Peddinghaus discusses the Peddiwriter with show visitors

Ocean and Peddinghaus share the booth with new Australian dealer Impact Machinery

The worlds most successful CNC Beam Drill Line, the Ocean Avenger. More than 500 of these machines are installed in over 60 countries

From L-R – Ben Turner, Kyle Fangmeyer, Anton Peddinghaus, Henry Peddinghaus, Robbie Clark, Nick Hajewski, with Oceanettes Carly, Laura and Becky

Impact Machinery’s Robbie Clark with the world famous Oceanettes Carly, Becky and Laura

The Oceanettes signing copies of the ever popular Oceanette Calendar

The Ocean Avenger proving again why it is the worlds best selling CNC Beam Drill Line of all time

The worlds best selling drill line of all time, the Ocean Avenger single spindle drill line

The stunningly beautiful Oceanettes, Carly, Laura and Carly

After a hard days work, you have to take time to relax. Impact Machinery’s Robby Clark and Peddinghaus’s Ben Turner enjoy the company of the world famous Oceanettes Becky, Carly and Laura

The New Ocean Blaster is a completely new Shot Blast machine, designed for ALL fabricators, even the small shops! The Ocean Blaster will clean all steel profiles up to 40″ tall and 20″ wide.

The Ocean Blaster has the smallest footprint and lowest overall height of any comparable shot machine. This allows it to fit into the smallest of shops. It is also the most economical machine to operate, due to the ULTRA Performance turbines that allow it to clean to a “near white” surface finish at faster than 5 ft per minute all at less than 50% of the power consumption of any competitive product.

Ocean wants you to be the lowest cost producer in your market. That is how you will win jobs, make money and stay in business. The Ocean Blaster will make a huge improvement to the profitability of your shop.

Watch the Ocean Blaster video below

http://www.youtube.com/watch?v=FBY6D6f2WSA

The saw features a 10HP motor, 1-1/2″ blade, and specially designed lifting rollers for assisting  the material move over the saw base, and for un-pinching blades when the steel moves under stress release.

Watch the DCM1825 video below – be sure to watch full screen in HiDef and subscribe to our channel to get all our latest machinery updates.

http://www.youtube.com/watch?v=mD3yDMTUscw

On hand to award Mika her $1000 check was Hunter Fry, President of Ocean Machinery.

Mika (Miss February) was crowned as the favorite Oceanette for 2012

The star of the show was the New Ocean Avenger PLUS model, developed in conjunction with its partner Peddinghaus. The Avenger PLUS has all the features of the original Avenger, plus a lot more!

Ocean Machinery’s booth at the 2012 Fabtech Show in Las Vegas

Intended specifically for the high end OEM and job shop fabricators, featuring an 8-position tool changer and 25HP 2,250 RPM servo spindle, this new machine not only capable of drilling with carbide tooling, but is also able to slot, mill, countersink, thread,  and do just about anything you can imagine with a drilling line.

The NEW Ocean Avenger PLUS drilled hundreds of 13/16″ holes in the flanges and web of this W12x96 column in just 5 seconds per hole!

The NEW Ocean Avenger PLUS plunge milled hundreds of 13/16″ x 1-1/2″ slots in the flanges of this W118x35 beam in just 10 seconds per slot!

Ocean also exhibited the brand new Ocean Terminator DCM 1825 Dual Column Double Mitering Band Saw built for them by their sawing partner MEP/Hyd-Mech. this semi-automatic saw was a big hit at the show, and is the obvious choice for strucutral and general fabricators wanting a highly efficient saw at a reasonable price. The Terminator DCM 18-25 also miters to 60 degrees in both directions and features pop-up lift rollers to allow fast mitering angle changes without moving the beam during the mitering process.

The all new Ocean Terminator DCM 1825 dual column double mitering band saw

The control panel for the all new Ocean Terminator DCM 1825 dual column double mitering band saw

Of course Ocean’s participation at a trade show is never complete without the wonderful Oceanettes!

Anton Peddinghaus, Jim Livingston, Robbie Clark, Darren Harmsworth, Karen Castorina and alltime favorite Oceanette Emilee!

William Giacometti, CEO of MEP Italy, Ocean Machinery’s sawing partner, with the always popular Oceanettes

The Ocean Machinery team complete with the ever popular Oceanettes!

“Since she arrived, Karen has been the backbone of Ocean Machinery, and has been a tremendous asset to our company. I don’t know how we would have coped without Karen”, says Hunter Fry, Ocean Machinery’s President.

“So much of our reputation in the market place is based on the customer service focus that  Karen has put in place. Her approach and attention to detail is appreciated by our dealers and our customers”, says Danny Steyn, VP Ocean Machinery.

Karen Castorina and her 10 year Service Award from Ocean Machinery

For the past 6 years the Andrews facility has moved heaven and earth to manufacture the steady stream of Avengers that have been shipped all over the world.

On hand for the celebrations was Anton Peddinghaus, the CEO and president of Peddinghaus Corporation, Bob Meltzer, the Peddinghaus Andrews COO, Jeff Mullikin, the designer and creator of the Ocean Avenger B Model, and the entire manufacturing and assembly crew from Andrews. Also in attendance was Mr Hilton McGill JR, the director of Economic Development for Williamsburg County.

A great lunch was served in the assembly hall and Danny Steyn, the VP of Ocean Machinery thanked the Peddinghaus team.

“On behalf of the entire team at Ocean Machinery, as well as our international dealer team, we extend a sincere thanks to the members of the Peddinghaus team for their exceptional commitment to our product, for its exceptional build quality, and especially for the manner in which we all work together. We are proud to be associated with Peddinghaus”.

Victor Ramos, President of J Blanco Associates and his wife Cara, as well as the selling dealer, Tom Doyle and his wife Jane, flew to Florida aboard a private jet to take delivery of their new drill line.

The Ocean Avenger is the Worlds Fastest Selling CNC Beam Drill Line and has completely changed the way small to medium fabricators process and drill steel sections. The Avenger drills holes fast and accurately in all steel sections including beams, channel, angle, square and rectangular tube, round pipe and tube as well as flat bar stock, base plates etc. Not only does the Avenger drill the holes but it also marks the layout marks for where the welded attachments such as stiffeners, shear tabs, clips, cleats and other components are to be welded.

The Ocean Avenger is produced for Ocean Machinery by Peddinghaus Corporation and is sold through the extensive Ocean Dealer Network

http://www.youtube.com/watch?v=PA5DuzC8x5w

Not only does it complete the cope in 1/10th the time to do it manually, but it also

• saves time and money in the fit-up process
• saves time and money in the welding process, and
• saves time and money in the field erection process

http://www.youtube.com/watch?v=UHHJnUQncvQ